Devatech Engineers Private Limited
Devatech Engineers Private Limited
Thane West, Thane, Maharashtra
Send SMS
Send E-mail

Air Treatment Solution

We are engaged in offering an extensive range of Air Treatment Solutions to our clients. These products manufactured using iron, steel, aluminum and other material with utmost care. We ensure that our solutions meet the clients requirements and international quality standards. Our solutions are used for various purposes in ventilating stores, shops, offices, factories, farm buildings and many others. We offer these solutions to our clients at competitive prices. This category includes Desiccant Dehumidifier, Air Handling Unit, Treated Fresh Air Unit, Evaporative Cooling Pad, Cross Flow Plate Heat Exchanger, Sensible Heat Recovery Wheels/Enthalpy Wheels and Desiccant Rotor/Dehumidifier Rotor.

These are explained below:

Request CallBack
Mould Dehumidifier
Get Best Quote
Approx.
Rs 2.5 Lakh
Per Set

Mould Dehumidifier

To provide the best product to our clients, we present the best quality of Mould Dehumidifier. The offered dehumidifier is highly used in the homes and commercial places to eradicate the problem of moulds. This dehumidifier is available in different sizes and technical specifications. Our provided dehumidifier is manufactured using the finest grade raw material and advanced techniques under the supervision of our qualified professionals. Moreover, this dehumidifier is rigorously checked against different parameters of quality by our quality inspectors to ensure its quality.

Features:

  • High strength
  • Low density
  • Fire proof
  • High performance
  • Energy efficient
  • Water washable

The Mould dehumidifier has


  • The highly effective eco-dry metal silicate desiccant synthesized rotor to fulfill the industrial requirements for an equipment with small footprint coupled with high moisture removal capability.

Features:

 

  • High strength
  • Low density
  • Fire proof
  • High performance
  • Energy efficient
  • Water washable

Additional Information:
  • Minimum Order Quantity: 1 Set
Yes! I am interested
Request CallBack
Air Handling Unit
Get Best Quote
Approx.
Rs 1.35 Lakh
Per Set

Air Handling Unit

We are engaged in offering our clients a high quality range of Air Handling Unit. The offered unit is manufactured from quality assured raw material and cutting edge machines under the surveillance of our deft professionals. Our offered unit is a cabinet type unit houses cooling coil, fan-motor drive, filters and drain pan in one compartment that can be opened from sides and top for servicing. Moreover, we offer this unit to our clients at affordable rate.

Features:

  • Flawless finish
  • Minimum maintenance
  • Easy to install
 

 

  • Hotels
  • Malls
  • Multiplexes
  • Pharmaceutical
  • Food industry
  • Textile industry
  • Tile industry
  • Chemical industry

Additional Information:
  • Minimum Order Quantity: 1 Set
Yes! I am interested
Request CallBack
Treated Fresh Air Handling Unit
Get Best Quote
Approx.
Rs 1.25 Lakh
Per Set

Treated Fresh Air Handling Unit

Our organization is placed among the noteworthy organizations, engaged in offering an excellent quality Treated Fresh Air Handling Unit that is used in several industrial applications. Perfect for purification of air, our skilled professionals manufacture this unit with the optimum grade raw material and advanced techniques in compliance with set industry standards. In addition to this, the provided unit is highly acclaimed in the market due to its high efficiency filtration, mixing and sound attenuation.

Features:

  • Precise dimensions
  • Rugged structure
  • Seamless finish

Additional Information:
  • Minimum Order Quantity: 1 Set
Yes! I am interested
Request CallBack
Evaporative Cooling Pad
Get Best Quote
Approx.
Rs 85
Per sqft

Evaporative Cooling Pad

With a precise understanding of this industry, we are engaged in offering highly qualitative Evaporative Cooling Pad. With the support of our knowledgeable professionals, the offered pad is precisely manufactured using the best quality material and ultra-modern techniques. Thispadis perfect material for paper and possess maximum cooling efficiency, high-absorb ability and energy saving. We offer this pad in numerous sizes and designs to meet the clients' frequent requirements.

Features:

  • Perfect finish
  • Maximum cooling efficiency
  • Small edge buildup for maximum output

Features:

  • Maximum cooling efficiency
  • High-absorb ability
  • High structural strength


Specifications
  • Color:brown,black,green and green-brown
  • Effect:great
  • Frame:aluminum,stainless steel
  • Usage:greenhouse,poultry,workshop

Additional Information:
  • Minimum Order Quantity: 100 sqft
Yes! I am interested
Request CallBack
Cross Flow Plate Heat Exchanger
Get Best Quote
Approx.
Rs 15,000
Per cfm

Cross Flow Plate Heat Exchanger

Cross Flow Plate Heat Exchanger that we offer has following Features:

  • Economically priced, durable and dependable
  • Precision fabrication ensures effective heat exchanger power
  • We offer Optional ones like Energy Saving FRP Fan, Edge Folded Fills, Temperature Sensing Controller, SS/ FRP Sprinklers / Fans
  • Corrosion resistant
  • Enhanced condensation efficiency
  • High heat recovery
  • High design pressure and temperature

Yes! I am interested
Request CallBack
Sensible Heat Recovery Wheel
Get Best Quote
Approx.
Rs 24,000
Per Set

Sensible Heat Recovery Wheel

We offer a wide range of Sensible Heat Recovery Wheels (HRW)/ Enthalpy Wheels that are manufactured using optimum quality aluminum and other material. Our wheels are in accordance with the international quality standards and meet the varied requirements of our clients. We offer these to our clients at a very fair price. Heat Exchanger Wheel (HEW)/ Rotary Sensible Heat Recovery Wheels are used for humidity and heat recovery for air handling units, indoor air quality (IAQ), modular air-conditioning units and several civil and industrial air-conditioning system for energy saving. This is fabricated using aluminum foil and shaped in honey comb.

 

Enthalpy Rotor / Sorption Rotor :


This model is fabricated using aluminum foil coated with 3Ao / 4Ao molecular sieve and offers total energy recovery (Sensible and Latent). This is extensively used for most of air-conditioning.

 

Sensible Rotor/Condensation Rotor :


This model is coated with aluminum foil that is a corrosion resistance material. Our rotor is applied for sensible or heat energy recovery application only.


Additional Information:
  • Minimum Order Quantity: 1 Set
Yes! I am interested
Request CallBack

Enthalpy Wheel

Approx. Price: Rs 55,000 / Set
Additional Information:
  • Minimum Order Quantity: 1 Set
Get Best Quote
Yes! I am interested
Request CallBack
Air Conditioning Solution
Get Best Quote
Approx.
Rs 35,000
Per Set

Air Conditioning Solution

working of "Air Conditioning" using Cooling Pads:-
Water is continuously circulated over and through the pad cells during operation. A pump transports water from a sump through a filter and to a distribution pipe along the top of each pad. A gutter collects unevaporated water that drains from the bottom of each pad. Water can be recycled as long as salt or minerals do not collect noticeably on the pads.
Only part of the water flowing over the pad material is evaporated. Water temperature does not have a great effect on the cooling achieved. Recommended minimum water flow rates through vertically-mounted pads and sump capacities are listed .
The excess water that is collected from the pad should be screened to remove pad fibers and other debris before the water is returned to the sump . A 50-mesh inclined screen mounted below the return flow is generally effective. Install removable caps on the ends of water distribution pipes to allow for bi-monthly flushing and convenient access.
The salt and mineral concentrations of water in a pad system increase as water evaporates. If the mineral content of the water supply is high, a bleed-off system is essential to prevent mineral deposits in the pad.

Additional Information:
  • Minimum Order Quantity: 1 Set
Yes! I am interested
Request CallBack
Air Cooling Unit
Get Best Quote
Approx.
Rs 35,000
Per Set

Air Cooling Unit

Pads are cellulose cooling cells 4" (10 cm) and 6" (15 cm) deep, 12"(30 cm) and 24" (60 cm) wide and available in 12" (30 cm) increments from 24"(60 cm) to 72" tall with two pieces of 4"(10 cm) deep combined to make 84"(214 cm) and 96"(244 cm) tall pads. Al they are available 78" (198 cm) tall. The cooling cells are made from a specially formulated cellulose paper impregnated with insoluble anti-rot salts. It is designed with an exclusive cross-fluted configuration which induces highly turbulent mixing inside the pad between the water and the air, and contributes to the evaporative efficiency. The cross-fluted design makes pads a strong self-supporting pad with high evaporative efficiency and low pressure drop (resistance to air flow).

A face velocity of 250 feet(75 m) per minute for 4"(10 cm) and 400 feet(120 m) per minute for 6"(15 cm) is recommended for the most economical cost and operation.

Besides the cooling pads, other components of interest in a complete evaporative cooling system include water distribution and return systems.


Additional Information:
  • Minimum Order Quantity: 1 Set
Yes! I am interested
Request CallBack
Air Evaporative Cooling Pad
Get Best Quote
Approx.
Rs 45
Per Set

Air Evaporative Cooling Pad

An evaporative cooler  is a device that cools air through the evaporation of water. Evaporative cooling differs from typical air conditioning systems which use vapor-compression or absorption refrigeration cycles. Evaporative cooling works by employing water's large enthalpy of vaporization. The temperature of dry air can be dropped significantly through the phase transition of liquid water to water vapor , which can cool air using much less energy than refrigeration. In extremely dry climates, evaporative cooling of air has the added benefit of conditioning the air with more moisture for the comfort of building occupants. Unlike closed-cycle refrigeration, evaporative cooling requires a water source, and must continually consume water to operate.

Additional Information:
  • Minimum Order Quantity: 1 Set
Yes! I am interested
Request CallBack
Air Dryer Dehumidifier
Get Best Quote
Approx.
Rs 2.55 Lakh
Per Set

Air Dryer Dehumidifier

Additional Information:
  • Minimum Order Quantity: 1 Set
Yes! I am interested
Request CallBack
Heat Recovery System
Get Best Quote
Approx.
Rs 1 Lakh
Per cfm

Heat Recovery System

Throughout the cooling season, the system works to cool and dehumidify the incoming, outside air. This is accomplished by the system simply taking the rejected heat and sending it into the exhaust airstream. Sequentially, this air cools the condenser coil at a lower temperature than if the rejected heat had not entered the exhaust airstream. During the heating seasons, the system works in reverse. Instead of discharging the heat into the exhaust airstream, the system draws heat from the exhaust airstream in order to pre-heat the incoming air. At this stage, the air passes through a primary unit and then into a space. With this type of system, it is normal, during the cooling seasons, for the exhaust air to be cooler than the ventilation air and, during the heating seasons, warmer than the ventilation air. It is this reason the system works very efficiently and effectively. The co-efficient of performance (COP) will increase as the conditions become more extreme .

Additional Information:
  • Minimum Order Quantity: 1 cfm
Yes! I am interested
Request CallBack
Industrial Heat Recovery
Get Best Quote
Approx.
Rs 30,000
Per cfm

Industrial Heat Recovery

Industrial energy efficiency is becoming more and more important due to environmental issues and increasing energy costs.Devatech as a Company wants to meet the Users requirement as exact and as precise as possible. Every National government regulation to preserve and proper utilization of energy has resulted in increasing the use of energy recovery equipment.

Additional Information:
  • Minimum Order Quantity: 1 cfm
Yes! I am interested
Request CallBack
Heat Recovery Ventilation
Get Best Quote
Approx.
Rs 2.1 Lakh
Per Set

Heat Recovery Ventilation

Energy recovery ventilation (ERV) is the energy recovery process of exchanging the energy contained in normally exhausted building or space air and using it to treat (precondition) the incoming outdoor ventilation air in residential and commercial HVAC systems. During the warmer seasons, the system pre-cools and dehumidifies while humidifying and pre-heating in the cooler seasons. The benefit of using energy recovery is the ability to meet the ventilation & energy standards, while improving indoor air quality and reducing total HVAC equipment capacity.

This technology, as expected, has not only demonstrated an effective means of reducing energy cost and heating and cooling loads, but has allowed for the scaling down of equipment. Additionally, this system will allow for the indoor environment to maintain a relative humidity of an appealing 40% to 50% range. This range can be maintained under essentially all conditions. The only energy penalty is the power needed for the blower to overcome the pressure drop in the system.

Additional Information:
  • Minimum Order Quantity: 1 Set
Yes! I am interested
Request CallBack
Air Heat Exchanger
Get Best Quote
Approx.
Rs 25,000
Per Set

Air Heat Exchanger

Product Details:
Minimum Order Quantity1 Set
TypePlate, Heat Recovery
Primary Exchanger MaterialAluminium
Inlet Temperature45
Outlet Temperature30
Flow Rate (L/min)500 cfm - 10000 cfm
Maximum Working Pressure (in PSI)120 pa
ApplicationFood Process Industry, Power Generation, Mining & Construction Industry, Pharmaceutical industry
Warranty12 months
Tube MaterialAluminium
Devatech air heat exchangers are perfect for environments where ambient air temperature is at or below the desired interior temperature of the enclosure.A air circuits prevent dust and pollutants present in ambient air from entering the enclosure’s interior.
Devatech as a Company wants to meet the Users requirement as exact and as precise as possible. Every National government regulation to preserve and proper utilisation of energy has resulted in increasing the use of energy recovery equipment.

Additional Information:
  • Item Code: DEV-HRW
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
  • Port of Dispatch: Thane
  • Production Capacity: 200 per month
  • Delivery Time: 1-2 weeks
  • Packaging Details: Wooden Packing
Yes! I am interested
View PDF
X
Looking for “Air Treatment Solution”?